Sportsliter Solutions Integral System - Manual (Page 9)

8
INTEGRAL SYSTEM
INSTALLATION
CAP PLATE COMPONENT MOUNTING TO STEEL OR CONCRETE POLES (FIG. 11)
ATTACH WIRING HARNESS STRAIN
RELIF TO SUPPORT INSIDE
CROSSARM ASSEMBLY
CROSSARM MOUNTING HARDWARE
SHIPPED WITH CROSSARM ASSEMBLY
¾” O BOLT (4)
FLAT WASHERS
NUT LOCK
WASHER
CROSSARM MTG. DETAIL
NOTE: TIGHTEN NUTS ON MTG. DETAIL
TO 100 ft/lbs. MINIMUM
CROSSARM ASSEMBLY
FIELD SIDE
HANDHOLE
WIRING HARNESS
CONNECT TO PLUG IN
REMOTE BALLAST BOX
AND JUNCTION BOX AT
TOP
SEAL ANY OPENINGS AROUND
BOTTOM ATTACHMENT POINT
WITH SILICONE SEALANT
SUPPLY WIRING
(BY OTHERS)
REMOTE BALLAST BOX
SECURE TO POLE WITH
¾” O BOLTS (2) AND
WASHERS SHIPPED WITH
BOX. (TIGHTEN TO 20 ft/lbs.
MAX)
STEEL OR CONCRETE POLE
GASKET BETWEEN POLE & REMOTE
BALLAST BOX FOR WATERTHGHT SEAL
FOR DETAILED INSTALLATION INSTRUCTIONS
FOR THE REMOTE BAX, SEE THE INSTRUCTION
SHEET INCLUDED WITH EACH.
CAP PLATE COMPONENT MOUNTING TO STEEL OR CONCRETE POLES (FIG. 11)
ATTACH WIRING HARNESS STRAIN
RELIF TO SUPPORT INSIDE
CROSSARM ASSEMBLY
CROSSARM MOUNTING HARDWARE
SHIPPED WITH CROSSARM ASSEMBLY
¾” O BOLT (4)
FLAT WASHERS
NUT LOCK
WASHER
CROSSARM MTG. DETAIL
NOTE: TIGHTEN NUTS ON MTG. DETAIL
TO 100 ft/lbs. MINIMUM
CROSSARM ASSEMBLY
FIELD SIDE
HANDHOLE
WIRING HARNESS
CONNECT TO PLUG IN
REMOTE BALLAST BOX
AND JUNCTION BOX AT
TOP
SEAL ANY OPENINGS AROUND
BOTTOM ATTACHMENT POINT
WITH SILICONE SEALANT
SUPPLY WIRING
(BY OTHERS)
REMOTE BALLAST BOX
SECURE TO POLE WITH
¾” O BOLTS (2) AND
WASHERS SHIPPED WITH
BOX. (TIGHTEN TO 20 ft/lbs.
MAX)
STEEL OR CONCRETE POLE
GASKET BETWEEN POLE & REMOTE
BALLAST BOX FOR WATERTHGHT SEAL
FOR DETAILED INSTALLATION INSTRUCTIONS
FOR THE REMOTE BAX, SEE THE INSTRUCTION
SHEET INCLUDED WITH EACH.