SPYPOINT Pro-X Plus User Manual
Page 15
28
29
VIdEO
When the « VIDEO » mode is selected, the
test light in the front of the camera winks for
60 seconds to allow the operator to walk away
from the camera.
tESt
To use to set the camera or the distance
setting. When the « TEST » mode is selected,
no picture or video is recorded. Walk
perpendicularly in front of the camera. When
the camera detects movement, the light winks
to indicate that normally, a photo or video would be recorded. If
the system does not detect the movement, increase the distance
detection using the wheel « DISTANCE » or realign the system
differently. When you understand how the device responds to
detections, you can better adjust the direction or the height of
the installation.
SEttINGS
Serves to allow own operator settings. To
configure the system in English, press the
button «» until « Language » is highlighted.
Press « OK », select « English » with the
button «» or «» and confirm the choice with « OK ». The
system will change all the menus in English by itself.
Work:
24H: Photos or videos anytime.
Day: Photos or videos during
daytime only.
Night: Photos or videos during
night-time only.
delay:
To select the time interval before the
camera records another photo or video.
This option prevents from taking too
many photos or videos.
English
Multi-shot:
To take up to 6 consecutive shots at
each detection, with a 10 second delay
between each photo. This option allows
up to 6 pictures from different angles
when the camera is in « PHOTO » mode.
Video length:
Allows you to select the recording
duration when the camera is set in
« VIDEO » mode.
Language:
To select language for the camera’s menu.
date:
To set the date as Month / Day / Year
time:
To set the time as Hour / Minute / Second
Stamp:
To select or cancel imprinting
of date, time, temperature and moon
phases on photos.
Full
moon:
New
moon:
First
quarter:
Last
quarter:
Quality:
To select the photo quality. If the user
wishes to record more images on the
memory card this option allows very
high quality of 12 MP or lower quality
such as « normal » 8 MP or « low » 5 MP.
temperature:
To select the temperature display
in °F or °C.
Continuous:
To allow taking pictures or videos even
if the memory card is full. The camera
will continue to record photos or videos
by deleting the first pictures recorded.
Power:
To allow you to select the battery power
or the electricity power.
English
T
Test
Settings
Video