Brother DCP-560CN - Manual (Page 51)

Printing photos from a memory card or USB Flash memory drive
43
5
Trimming
5
You can trim your photo and print a part of the
image.
Note
If your photo is very small or of irregular
proportions you may not be able to trim
the photo. The LCD will display
Image Too Small.
or
Image Too Long.
.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
b
Press a or b to choose Trimming.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Adjust the red frame on your photo.
The part inside of the red frame will be
printed.
„ Press + or - to enlarge or reduce the
frame size.
„ Press each arrow key to move the
position of the frame.
„ Press Ink Management to rotate the
frame.
„ Press OK when you have finished
the frame setting.
e
Press + or - repeatedly to enter the
number of copies you want.
f
Do one of the following:
„ Press OK and change the print
settings. (See page 44.)
„ If you do not want to change any
settings, press Colour Start to print.
DPOF printing
5
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, Fuji Photo
Film Co. Ltd., Matsushita Electric Industrial
Co. Ltd. and Sony Corporation) created this
standard to make it easier to print images
from a digital camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When the memory card (CompactFlash
®
,
Memory Stick
®
, Memory Stick Pro™,
SecureDigital MultiMediaCard™ or
xD-Picture Card™) with DPOF information is
put into your machine, you can print the
chosen image easily.
a
Make sure you have put a memory card
in the correct slot.
Press (PhotoCapture). The
machine will ask you if you want to use
DPOF setting.
b
Press + to choose Yes.
c
Do one of the following:
„ Change the print settings.
(See page 44.)
„ If you do not want to change any
settings, press Colour Start to print.
Note
An invalid DPOF File error can occur if the
print order that was created on the camera
has been corrupted. Delete and recreate
the print order using your camera to
correct this problem.
For instructions on how to delete or
recreate the print order, refer to your
camera manufacturer's support website or
accompanying documentation.