SPYPOINT LIT-C-8 - Manual

www.spypoint.com
LIT-C-8
v.1.1
RECHARGEABLE LITHIUM BATTERY
AND CHARGER
User manual
Before using the lithium battery for the fi rst time,
carefully read the following instructions to use it to
its full potential.
FEATURES
• Charging time ≈ 6 hours
• Operating temperature (-20 °C to +50 °C)
(-4 °F to +122 °F)
• Storage temperature (-30 °C to +75 °C)
(-22 °F to + 167 °F)
• Voltage 7.4 volts
• Capacity 2000 mAh
KIT INCLUDES
• Rechargeable lithium battery (LIT-09)
• AC charger
• User manual
RECHARGING THE LITHIUM BATTERY
To recharge the battery, plug it in the provided AC charger. Green light indicates that
the battery is fully charged. The light will turn to red during the charge. The charger
will automatically stop recharging when the green light is on.
INSERT LITHIUM BATTERY IN A CAMERA USING WITH A SOLAR PANEL
To maintain the charge of the lithium battery with the solar panel, insert the battery
into battery case of the camera. Plug the solar panel in the “DC 12V” or “Solar
Panel” outlet of the camera (see user manual of the camera to make sure it is
compatible with the solar panel).
Make sure that the battery is fully charged before plugging in the solar panel. It will
keep the charge of the battery but does not recharge it if it is empty.
RED
BLA
CK
Solar panel
SPYPOINT camera
LIMITED WARRANTY
SPYPOINT LIT-C-8 designed by GG Telecom, is covered by a one (1) year
warranty on material and workmanship starting from its original date of purchase.
The sales receipt is your proof of purchase and should be presented if warranty
service is needed.
This warranty does not cover any GG Telecom product whichhas been subjected
to misuse, neglect and accidents or has been improperly used or maintained. Any
modification or tampering of the product will affect its operation, performance,
durability and void this warranty.
REPAIR SERVICE
Repairs for damages not covered by the warranty will be subject to a reasonable
charge. For technical assistance, write to [email protected]. Give a description
of the problem with a phone number where you can be reached.
IMPORTANT: Under no circumstances will GG Telecom accept returned products
without a Return Material Authorization number (RMA).
Step 1
Insert the battery in the battery case of the camera
starting with the down side.
Step 2
Push on top of the battery to insert it completely in the
battery case.
Note: For the latest update of the user
manual, refer to our website.