Square Perfect 5080 SP3500 Flash Kit - Manual (Page 3)

SP3500 Flash Studio Kit
Thank you for your purchase of the SP3500 Flash Softbox Please read this manual carefully before use, and keep it
Studio kit. This manual has been written to help you with handy for use during break down of equipment. Please
the assembly, operating procedures and accessories. read and heed all safety precautions listed in this manual.
Square Perfect's SP3500 Flash Kit is manufactured with For ordering spare bulbs or replacement parts, contact us
the finest material available. Your flash kit will provide at [email protected]. Also check out our extended
many years of quality service with proper care and line of photo equipment now available.
handling.
SP160 lamp body.
12' power cord.
Nylon Carry Case. Two layer for stowing light stands (bottom) Second layer has adjustable compartment for easy.
Four leaf barn door set with color
filter attached to the SP160 flash
head on the SP803 stand.
Four leaf barndoor. 1 set Red, blue, yellow frosted and honeycomb filter. Easy
snap on attachment.
Technical notes for use:
Remove protective cover from
mounting tip before attempting
to place flash head on stand. 1. Swivel screw.
2. Umbrella rod mount.
3. Mounting screw
SP803 professional duty
adjustable light stand.
Small stand for highlight
/ fill strobe flash.
Four panel softbox set. SP 4" lamp
connector.
1.
2.
3.
Highlight / Fill strobe lamp
body.
Snoot will direct light to exact spot
without affecting surrounding area.
Varigated dye backdrop
Black backdrop
White backdrop
©2007 All rights reserved Square Perfect Photo.
If fill strobe is not working, be sure
to check the on/off switch. Located
on the back of the lamp holder.