BACtrack s75 PrO - Manual (Page 7)

10 11
Flow Detection Settings
use this option to adjust how hard a user
is required to blow. Press start to change
the settings.
Low level flow detection
This is the default setting for the unit.
High level flow detection
Press start to change to the high level flow
setting.
This level requires a stronger breath by the
user and is recommended if previous test
attempts have been unsuccessful.
User activated test mode
Press start again to change to the user
activated test mode. when testing in this
mode, the operator must press start during
a breath sample to activate the pump and
perform a test.
speCIfICaTIOns
Dimensions 2.3 x 4.8 x 1 inches
(5.8 x 12.2 x 2.5 cm)
weight 4.4 oz (125 g)
with mouthpiece and batteries
sensor
Technology
Fuel cell sensor technology
Detection range 0.000 – 0.400 %BaC
Test Count Displays total number of tests performed
Power supply Two aa alkaline batteries, included
Battery life approximately 1500 tests
warm up Time 10-20 seconds
response Time 10 seconds
sensor
accuracy
+/- 0.005 %BaC @ 0.1 %BaC
Operating
Temperature
32-104 °F (0-40 °C)
BAC
BAC
BAC
BAC