STEMCO HandBAT RF - Manual

5/29/2012 Page 1
User Reference Guide
Active Handheld Reader
Turning a unit on
When a HandBAT is first picked up the display will normally be turned off. To turn the unit on
press any key. If the display contrast appears too dark, or too light, press the MAIN function key
and then the right ( → ) or left ( ← ) arrow keys to change the contrast. The right arrow key each
time it is pressed will darken the display. The left arrow key each time it is pressed will lighten the
display.
Main
This screen is the Main Menu and is used as a selection screen for desired functions of the
handheld reader. Select the function you wish to perform using the up ( ↑ ) or down ( ↓ ) arrow
keys. You have three functions to choose from.
The primary function of the HandBAT is to Read Devices.
The second function is for reviewing Previous Reads stored in the HandBAT.
The third function is for Configuration of the HandBAT itself.
On Special Edition HandBAT’s a 4
th option will be available Labeled Update SE TracBAT. This
menu item is used for changing SE TracBAT calibrations. See help menus in the HandBAT for
information on how to use this special menu.
At any time, and in any screen on the HandBAT, you can press the help key for assistance.
All help screens are context sensitive.
Read Devices