Steriflow JSR Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
JSR Series
High Purity Bio-Pharma Gas Pressure Reducing Valves
JSR is the first high purity gas pressure regulator designed and
built specifically for hygienic, ASME BPE gas applications.
Traditionally, manufacturers adapted their industrial gas
regulators for use in biopharm by simply changing the con-
struction materials and surface finish. Not so with the JSR.
It's been designed specifically to eliminate the exposed
threaded connections and permanent contaminant traps
below the diaphragm. And, it features an in-line removable
trim set to facilitate quick trim change out and cleaning with-
out valve removal or disassembly.
The durable valve body and metal trim components are
machined from ASTMA479 316L SST barstock and fin-
ished to ASME BPE SF5 (20Ra micro-inch, electropolished)
standard. The valve is outfitted with the rugged Jorlon dia-
phragm and Teflon, PEEK, or EPDM seats and seals that
are all FDA approved, USP Class VI compliant materials.
These materials of construction enable JSR to withstand the
rigors of SIP and CIP processes if required. And, the new
EPDM seat reduces lockup to less than 2.5 psig.
F
eatures
• No exposed threaded connections below diaphragm
• In-line removable seat and trim facilitate cleaning and
maintenance
• Barstock construction guarantees material integrity and
surface finish
• High flow rate coupled with high rangeability reduces
need for reduced trim sizes
• Minimized internal volume
• Proprietary Jorlon diaphragm material provides excep-
tionally long life and CIP/SIP capability
• Soft seat material for ANSI Class VI shutoff
• Can be used on continuous clean steam, and on non-
cavitating fluids.
D
ocumentation
The following documentation is shipped with each order:
• Steriflow Unicert
— Traceable Material Heat Number for body and
ferrules
— Certificate of Compliance to FDA and USP
Class VI
Certificate of Surface Finish
• Final Test Reports and Certificate of Origin available
upon request at time of order
s
urFace Finish
• ASME BPE SF5 (20Ra µ in (0,5 µm),
electropolished) – standard for all
external and wetted metal parts
• Other finishes optional
• O
2
cleaning - optional
a
pplications
Ideal for clean gases typically found in bio-
pharmaceutical, pharmaceutical and food &
beverage processes including:
• Clean Filter Air
• Nitrogen
• Carbon Dioxide
• Argon
• Oxygen
• Custom purge or blanket gas
Sanitar
y V
alv
es
JSR Series Ultra
-High Pressure Reducing
V
alv
es
CRN Registration Number Available