Steriflow JSRLFLP Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
JSRLFLP Series
Pressure Reducing Valves for Low Flow and Low Pressure
Biopharmaceutical and Parenteral process Gas
JSRLFLP is a high purity low flow, regulator designed and
built specifically for very low pressure hygienic, ASME BPE
gas applications.
The JSRLFLP has been designed specifically for very low
pressure clean gas regulation in Stainless and Single Use
Disposable applications. Whether it's precise regulation for
sparging, blanketing, motive force, or SUD bag inflation,
the JSRLFLP was built for the job!
The durable valve body and metal trim components are
machined from ASTMA479 316L SST barstock and fin-
ished to ASME BPE SF5, 20Ra micro-inch, (0.5 Ra microm-
eter) electropolished as standard.
The valve is outfitted with a sensitive PTFE Jorlon dia-
phragm and Teflon or PEEK, seats and seals that are all
FDA approved, USP Class VI compliant materials. These
materials of construction enable JSRLFLP to withstand the
rigors of an autoclave if required.
F
eatures
• Stable outlet pressure setpoints at very low pressure
• Very low set point offset (droop) especially at higher
inlet pressures
• Top entry design facilitates in-line cleaning and
maintenance
• Barstock construction guarantees material integrity
and quality surface finish
• Four Cv's from 0.01 to 0.2 guarantee a valve that will
fit your specific application
• Optimized internal volume
• Proprietary Jorlon diaphragm material provides ex-
ceptionally long life
• Soft seat material for ANSI Class VI shutoff
D
ocumentation
The following documentation is shipped at no charge:
• Steriflow Unicert: Certificate of Compliance for:
- Material, including MTR’s
- Surface Finish
- FDA/USP Class VI
• Traceability:
Each Unicert includes individual valve serial
numbers, heat numbers and attached MTR’s directly
traceable to the valve serial number and heat numbers
imprinted on all wetted metallic components.
s
urFace
F
inish
• ASME BPE SF5 (20 Ra µin (0.5 Ra μm), elec-
tropolished) — standard for all external and
wetted metal parts
• ASME BPE SF1 (20 Ra µin) mechanical finish,
non-electropolished and other finishes available
• O
2
cleaning — optional
a
pplications
Ideal for low pressure regulation of gases used in
bio-pharmaceutical R&D and production facilities.
Designed specifically for very low pressure control
in traditional Stainless Steel and Single Use Dispos-
able installations such as: Gas overlay or motive
force movement, pressure filling, Lyophilization,
sparging, or SUD bag inflation.
• Clean Filter Air
• Nitrogen
• Carbon Dioxide
• Argon
• Oxygen
• Custom purge or blanket gas
Sanitar
y V
alv
es
JSRLFLP
Series Low FlowLow Pressure Gas Reducing
V
alv
es