Sulky VISION 2 WPB Quick set-up - Manual (Page 5)

FERTILISER CALIBRATION IN DYNamic MODE...
FERTILISER CALIBRATION IN STATic MODE
• Return to the SET menu (settings) and activate the
DYNamic calibration mode
• Return to the MAIN menu
• Press
• « TEST » fl ashes
• This message appears
• Wait until the message
disappears before
starting to spread
1 2
3 4
• After 200 kg
has been spread,
« STOP » fl ashes
• Stop spreading when
possible and when the
tractor is on a fl at area
(shutters closed)
• Press « STOP »
STATIC MODE
This has already been pre-selected from the SET menu
(settings)
• Repeat the fertiliser calibration in the STATic mode a second
time before changing to DYNamic mode
• This message appears
• The calibration (T-factor)
has been saved
+ + + S
E
T
ESC