Summit FF1074IM - Manual

FELIX STORCH, INC.
Summit Appliance Division
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com
WATER-LINE CONNECTION INSTRUCTIONS
FOR INSTALLED (MODULAR) ICE MAKERS
Important Information
 This manual gives you complete instructions on how to
connect a water line to an ice maker already installed in your
SUMMIT refrigerator. Please read the manual carefully and
follow the instructions exactly as described. Make sure you
observe all safety instructions.
 A certain amount of mechanical ability is required to complete
the water connection process.
 You will have to purchase a copper tubing kit that contains a
"Regular Valve and Clamp Assembly" (for refrigerators with an
automatic ice maker, or self-filling trays). The kit contains all
of the hardware necessary to connect your ice maker to the
water supply. You can purchase one at most hardware or
plumbing supply stores.
 DO NOT USE PIERCING-TYPE OR 3/16" SHUT-OFF
VALVES. They reduce the flow of water to the ice maker and
are easily clogged.
 DO NOT USE POLYETHYLENE TUBING to connect the ice
maker to the water line. Use only 1/4" (O.D.) copper tubing.
 CUSTOMER INSTALLATION IS NOT WARRANTED BY THE
REFRIGERATOR OR ICE MAKER MANUFACTURER.