Summit DW2432SS Quick Start - Manual (Page 2)

17 1164 01 00-AA
5 6 7 8
4 3 2 1
SALZ
TU
Z
SA LT
S
E
L
Quick Wash
China/Crystal
Regular Wash
Pots & Pans Plus
FUNCTION BUTTONS EN
1 Program lights
2 Rinse aid level indicator light *
3 Salt level indicator light *
4 Program follow up lights
5 Cycle Select button
6 Start/Pause button
7 Door handle
8 On/Off button
* Depending on model
On/Off button
Turn the dishwasher on the with On/Off button. When turning on,
the icon on the display module of the last used program will light up.
Start/Pause button
Use this button to start the selected program; the light on the button
lights up.
Stop the program with the Start/Pause button if you would like to
open the door once the dishwasher’s washing program is running.
Cycle Select button
Use the Cycle Select button to select the desired program. The
diode of the corresponding program will light up.
Cancellation of a program
To cancel a program while the dishwasher is running:
1. Press Start/Pause button for 5 seconds. The indicator light will
start flashing.
2. The dishwasher will drain the water inside the machine for 45
seconds.
3. The program is cancelled when indicator light goes off.
4. You can then choose and start a new program.
WARNING
Depending on the stage of the program you have cancelled,
there may be detergent residue or rinse aid inside the machine
and on the dishes. Make sure the items in the dishwasher are
not used before washing properly. Ingestion or inhalation of
detergent or rinse aid may cause serious injury. Avoid contact
with skin and eyes and keep children and infirm persons away
from these materials.
Program change
To change a running program:
1. Press the Start/Pause button. The indicator light on the button
will turn off.
2. Select a new program and start it with the Start/Pause button.
The respective program diode lights up.
CAUTION
The new program will NOT start right from the beginning. It will
start from the stage last carried out by the previous program
selection.
WARNING
Depending on the length of the terminated program detergent
and rinse aid may still be in the dispensers.
Ingestion or inhalation or detergent or rinse aid may cause
serious injury. Avoid contact with skin and eyes, and keep chil-
dren and infirm persons away from these materials.
1 Program selection via diode lights
2 Rinse aid level indicator light
(depending on model)
If this indicator light comes on, you need to refill rinse aid.
You can also tell whether rinse aid must be refilled by looking at the
rinse aid dispenser. When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the color is light, open the dispenser and refill rinse aid.
3 Salt level indicator light (depending on model)
When this indicator light comes on, you must refill special salt.
The salt content can be read on the container for the salt. When the
visual fill indicator is dark, there is enough salt in the container.
When the color is light, open the container and add dishwasher salt.
4 Program follow up lights
During the washing process, the individual active program seg-
ments are shown by the program follow up lights.
Notice :
 When using the 30 minutes quick wash
program, the program follow up light for
drying does not light up.
 The washing process is only complete
when the program follow up light “End” lights
up.
Wash
Rinse
Dry
End
Dark : Sufficient rinse aid
Light : Refill rinse aid
Visual indicator