Summit WMC64P User Manual - Manual (Page 27)

Remove the three transport bolts and the plastic
plugs for locking the machine for transport before
using the machine.
1. Loosen and remove the bolts as illustrated
below.
2. To remove the plastic plugs that held the bolts,
squeeze together and pull out.
3. Remove the plastic covers from the plugs.
Push the plastic covers into the three holes
that contained the plugs. Save the plastic plugs
in case the machine is moved in the future.
NOTE!
If the machine is to be transported, the bolts and
plastic plugs for locking the machine during
transport must be installed to prevent damage
to the machine through shaking. If the transport
bolts or plastic plugs have been lost, you can
order new ones from your retailer.
Designation Article number
Screw 80 882 77
Plastic plug, transport
lock 80 901 05
Order three of each item!
27 Customer Care Center
1-800-898-1879
www.askousa.com
Transport protection