Summit ARWDF129SNA - Manual (Page 10)

10
NA
Personalisation
Setting the temperature
By pressing the TEMPERATURE button to set the wash temperature. (See Table of wash cycles) Wash temperature can be
set selecting , “Cold”, “Warm”, “Hot” or 2 in-between positions which correspond to intermediate levels of water tempe-
rature (example: the position between “cold” and “warm” is lukewarm). See below for the indication in °C and °F for each
temperature position.
The available selections are:
Setting the drying cycle
The desired drying cycle type may be set by pressing the
DRYING button once or several times. Two options are
available:
A - Based on time: from 40 to 180 minutes.
B - Based on the how damp the clothes are once they have
been dried:
Iron dry : slightly damp clothes, easy to iron.
Cupboard dry : very dry clothes, recommended for towelling
and bathrobes.
If your laundry load to be washed and dried is much greater
than the maximum stated load (see adjacent table), perform
the wash cycle, and when the cycle is complete, divide the
garments into groups and put some of them back in the
drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the
load.
N.B.: when the drying is complete there is a cooling period, even though the DRYING button is in the 0 position.
Drying only
Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the desired
drying duration using the DRYING button.
Functions
The various wash functions available with this washer-dryer will help to achieve the desired results, each time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Delay timer
To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed (this
may be between 1 hour and 24 hours).
To disable the function press the button until the text
is displayed.
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
! This option is enabled with all programmes.
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this
function offers a high-performance wash.
! This function may not be used in conjunction with wash cycles 4, 5, 8, 10, 11, 12, 13, A, B, C.
Table of Drying times (guideline values)
Fabric
type
Load type
Max.
load (lb) Cupboard
dry Iron
dry
Cotton
Clothing of different
sizes, Terry towels
11.02 180 160
Synthe-
tics Sheets, Shirts, Pyjamas,
socks, etc.
6.6 180 160
Wool Knitwear, Pullovers, etc. 3.30 150 130
• Tap water
• Cold 15 °C/ 59 °F
• 20 °C/ 68 °F
• Warm 30 °C/ 86 °F
• 40 °C/ 104 °F
• Hot 57 °C / 134 °F
COLD
WARM
HO
T