Summit SCM852 - Manual (Page 15)

18. MEMORY FUNCTION
19. INQUIRING FUNCTION
(1) In clock state, press " AM/PM " to display "A" or "P" for 3 seconds.
In cooking state, press " CLOCK/PRE-SET ", the LED will display clock for three seconds
and the "AM/PM" for another 3 seconds.
(2) In pre-set state, LED will display the clock and the seconds will be flashing at the same
time. Press " AM/PM " and "A" or "P" will be displayed for 3 seconds. Then press
" CLOCK/PRE-SET " to inquire the pre-set time. The pre-set time will be flashing for
3 seconds, then "AM/PM" will be displayed for another 3 seconds. After that, the oven
will turn back to the clock state.
17. PRE-SET FUNCTION
(1) Set the clock first. (Consult the instruction of clock setting.)
(2) Set a certain cooking procedure(one or two blocks), the setting method and display are
same as relevant cooking procedure. (Defrosting is beyond pre-set cooking).
(3) Press " CLOCK/PRE-SET " to display current time and hour figure is flashing, the icon
" : " keep lighting on.
(4) Press number keys to input the cooking time.For example: to set the time is 12:12, you
can press the number keys "1","2","1","2" in order.
(5) Press " AM/PM " to choose AM or PM. AM or PM will be selected in turn by pressing
the button of " AM/PM " continuously.
(6) Press "START/ +30 SEC." to confirm the preset procedure.When it is confirmed, the
unit will go back the clock states.
15
(1)Press "MEMORY" to choose memory 1-5 procedure. The LED will display 1,2,3...5.
(2)If the procedure has been set, press " Start/ +30 Sec." to use it. If not, continue to set
the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "MEMORY" to save the procedure and turn back to the
waiting states.If press " Start/ +30 Sec." ,it can save and operate the setting.
16. Multi-section cooking
At most 2 sections can be set for cooking. In multi-section cooking, if one section is
weight defrosting, then weight defrosting shall be placed in the first section. When the
first stage finish, the buzzer will sound once and the next stage will begin cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave
power for 10 minutes. The cooking steps are as following:
(1) Press "POWER" for times to choose 80% microwave,now "PL8" is displayed;
(2) Press number keys "5","0","0" to set the cooking time;
(3) Press "POWER" for times to choose 60% microwave power, "PL6" is displayed;
(4) Press number keys "1","0","0","0" to set the cooking time;
(5) Press "START/+30SEC." to start cooking.
(7) When time arrives, the buzzer will sound twice and the cooking starts.