Summit SCM1800M2 User Manual

Page 12

Advertising
background image

Installing and removing the ceramic board:

The ceramic board is removable. You can install or remove it following the steps below :

To install the ceramic board

1. Turn off the power. Install the ceramic board when the cavity has cooled.

:

2. Hold the ceramic board with both hands and gently push it along the grooves. Be careful because the

board is breakable. Make sure the board is installed within the grooves, not above them. The word

WARNING should be visible at the front of the board.

Place the board in the groove on each side.

The word WARNING is visible at the front

of the board.

3. Be sure the ceramic board has been pushed all the way to the back of the cavity. If you do not install it

correctly, the door cannot be closed.

11

Advertising