Blaupunkt CANBERRA RCM 85 - Manual (Page 17)

33
Canberra RCM 85
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Selecting a disc/track using the
rocker switch
Select track (upwards): Press briefly.
CUE - fast advance (audible):
Press and hold down.
Repeat track: Press briefly.
Select track (downwards): Press repeated-
ly.
REVIEW - fast reverse (audible):
Press and hold down.
Select disc (downwards)
Select disc (upwards)
The display shows you the selected mode.
SCAN
Use this function to scan the CD tracks.
To start the SCAN:
•
Press the SC/MIX button briefly. The
tracks will be played briefly one after
the other in ascending order. The num-
ber of the currently scanned track flash-
es in the display.
CD changer control (optional)
RM (Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.
To quit the DSC programming mode and
store the adjustment:
•
Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
Overview of the DSC factory
settings
LOCAL : 1
DIS : 1
TIME : OFF
TA VOL : 4
BEEP : 3
LED (Code) : 1
LOUD
: 4
RM : OFF
You can operate the Blaupunkt CD changer
CDC-A05 in combination with this car radio.
Switching to changer operation
with SRC on the car radio
Make sure that a magazine is inserted.
Press SRC to switch between the different
audio sources (radio - changer - tape).
Press SRC as many times until the changer
functions appear in the display.
CD = disc, T = TRACK (title).
0:24 = playback time of the current title