Summit SWC1545 - Manual (Page 5)

LOCATION OF PARTS
Hinge
Activated
charcoal filter
Glass door
Ventilation hole
Adjustable foot (4)
Front ventilation
base
Sliding shelf
Cabinet
Sliding shelf
Upper zone
Lower zone
Control panel
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
 Remove the exterior and interior packing.
 Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 Install the handle on the door if it is not already in place (see page 7).
INSTALLATION OF YOUR APPLIANCE
 The appliance is designed for free-standing installation.
 WARNING: Do not store or install the appliance outdoors.
 CAUTION
: This appliance is designed for storing and cooling wines. Do not store perishable food,
medicine or other medical products.
 Place your Wine Cellar on a floor that is strong enough to support it when it is fully loaded. To level the
unit, adjust the four leveling legs. (It is advisable to use a carpenter's level.)
 Leave at least 2 inches of space around the back and sides of the unit, and 1 inch on top, to allow
proper air circulation to cool the compressor and condenser. Take care that the air vent at the front of
5