Sunnex RLM-CLT-230V - Manual (Page 3)

¨
Sunnex I nc is I SO 9001-2000 certified
www.sunnexonline.com
A. Insert the bottom stem of the articulated
arm into the vertical pole.
B. Secure the arm insertion by tightening
the black knob. Do not use excessive
force as this may damage the components.
C. Adjust the position of the lamp head
by turning the head at the joint.
The arm is equipped with friction joints
and can be adjusted as needed into the
desired position.
D. To attach the wire trolley, place trolley
on the floor and press the base firmly
down inside the wings of the trolley.
E. CAUTION! Do not extend the arm
horizontally to its full extension as
this may result in instability of the
base.
6. Sunnex Limited Warranty
Sunnex warrants that its Products shall be free from defects
in material and workmanship and this warranty shall remain in
force and effect for a period of three (3) years from and after
the date of its Delivery (the"Warranty Period") provided that
this warranty shall be subject the following conditions:
(a) the Sunnex Installation Instructions shall have been strictly
complied with in all respects by the party performing the
installation of the Product; and
(b) the Product shall have been used only for the purposes for
which it is intended and shall not have been abused, damaged
or modified during installation or from usage.
(c) ordinary wear and tear shall not be covered by the terms
of this warranty.
(d) written notice to Sunnex of the defective Product shall be
given within the Warranty Period.
If a Product is found to be defective and the provisions of this
Section have been complied with Sunnex will repair or replace
the Product, at its expense.