BUSH DPF801 - Manual (Page 11)

8
4 System Settings
4.2.5 TFT Saturation
This option can be used to set the saturation of the display. The saturation is divided into 15 levels,
from -7~0~7, with larger numbers representing a higher degree of saturation.
4.3 Custom Setup
4.3.1 OSD Language
This option can be used to set the language for the OSD (on screen display). The user can choose from:
English.
4.3.2 Encoding
This option sets the character encoding of the filenames. There are two types of encoding to choose from,
Western European and Central European.
Setup Menu Display Setup
:Select :Confirm
Brightness
Contrast
TFT Brightness
TFT Contrast -4
-3
-2
-1
0
TFT Saturation
4.3.3 Repeat mode
This option allows the user to set the play repeat mode. There are four available options: Off, One,
Folder, and All.
Off: turns off the repeat mode.
One: repeats the file that is currently playing.
Folder: repeats the folder that is currently playing.
All: repeatedly plays all of the files inside the storage medium.
4.3.4 USB Source
Select storage device connected to PC
4.4 Exit
Leaves the setup menu, and goes back to the main menu.
After choosing [Photo] from the main menu, press the ENTER key, and the system will automatically
playback found image file stored in external storage device (SD/MMC, USB, CF) or internal memory. If no
supported file is found, "No Playable File" will appear on the display then return to Main menu.
To playback image from a different storage device, press HOME button in any mode then select Photo in
Main menu then press ENTER button. Use buttons to select decided device followed by
ENTER button to start playback image.
Note:-
The photo frame can support image files in JPG format.
5 Photo
4.3.5 Default
By setting this option, all settings will be reset to the original system settings.