Talos Security SMS (DRL/DRM/DRH/DRSDI) User Manual
Page 16
15
④ Setup Server
Click the [Setup Servers] button to apply the setup to DVR.
⑤ Upgrade the DVR Firmware
Click the S/W Upgrade button to upgrade the DVR
firmware
NOTE
: Before the setup application window appears, you will be prompted to enter a password.
The password is the same as the one used for the Client Setup. (Default = 1234)
A
A. Select the DVR for changing setup by double click under group.
If multiple DVRs are added, the same setup is applied to all the added DVRs.
B. Click the [Config] button and click the [OK] button when appears [Remote Configuration] message.
B
NOTE :
If NETWORK Accept is checked, the
network setup is also applied. If the
same network setup is applied to
multiple DVRs, there may be problems
caused by IP address conflict.
C