Talos Security DR1600 Series DVR Quick Start Guide - Manual (Page 7)

7
Testing Your System
• We highly recommend bench testing your system prior to
installation
• On a table or bench unpack your DVR, cameras, power supplies,
and cables
• As if installing the system, connect each piece to verify all is
working properly
Connecting Cameras
• Pre-assembled cables are available that carry both video and power
• Connect a cable to each camera
– DC jack on cable to DC plug from camera
– BNC jack on camera to BNC plug from cable
• Connect power cables to power supplies
– Power cables can only be installed in one direction, the DC plug to the
camera and the DC jack to the power supply
• Turn on the DVR, an image will be visible on any channel with a camera
connected
• You have now confirmed that all components of your surveillance system
are functioning
• Shut down DVR