Talos Security DR800 Series DVR Quick Start Guide - Manual (Page 5)

5
Connecting a Monitor
• You will need a monitor or TV to set up the DVR for use
• Connect a monitor to the DVR using the HD15 female output
• Or connect the DVR to the composite video input on a TV
– You will need a BNC video cable with a BNC to RCA adapter, available from
Parts-Express
Connect a TV
here using a
BNC to RCA
adaptor
Power
Connect a monitor here
using a VGA Cable
USB thumb
drive
Cat 5 connection
for networking
Connect the
mouse here
Turning On DVR
• When the DVR is first initialized you will need to format the hard drive by clicking on the
“Yes” tab
• The DVR will display a message on the monitor when hard drive format is complete
• The DVR will beep to inform you that no cameras are connected
Connect camera
video here