Bryston SST CSERIES - Manual (Page 8)

6B SST C–SERIES
The Bryston 6B SST provides three channels of
powerful amplification in a single chassis. Consisting
of three totally independent amplifier modules, each
with its own power transformer and power supply,
each audio channel will supply effortless power even
to the world’s most demanding loudspeakers. The 6B
SST is a convenient solution for home theater left-
center-right amplification and is also a great way of
tri-amplifying 3-way loudspeakers.
3 – channel amplifier 3 – position
sensitivity switch:
1V, 2V, or 4V Polarity
switch
on each
channel
EFFORTLESS POWER
SPECIFICATIONS AVAILABLE TO ALL SST AMPLIFIERS
Distortion < 0.005% from 20Hz to 20kHz at rated output into 8 Ohms
IM or THD+noise < 0.007% from 20Hz to 20kHz at rated output into 4 Ohms
Noise
(Measured with input shorted; 20Hz. to 20kHz.)
>110dB below rated output @ 29dB gain (-75dBu)
>113dB below rated output @ 23dB gain (-78dBu)
>116dB below rated output @ 17dB gain (-78dBu)*
*setting available on models 6B & 9B only
Slew rate Greater than 60 volts per microsecond
Power bandwidth From less than 1 Hz to over 100 kHz
Damping factor Over 300 at 20 Hz, ref. 8 Ohms
Input Impedance 50k Ohms single-ended, 20k Ohms balanced (10k each leg)
S
S
T
C
–S
E
R
IE
S
300 W into 8 Ohms
500 W into 4 Ohms
7