TaoTronics TT-BS009 - Manual (Page 37)

37
Power off Interval
Power Off Interval（2 Digits；00~99seconds；15seconds*）4
Shut down the Scanner Immediately
RF operating mode:
NO-Store Mode:
Do not batch data. The scanner attempts to transmit every scanned barcode.
If the transmission is failed, the barcode data is ignored and issued a "beep
beep beep” sound.
Auto-store Mode:
The scanner starts storing barcode data when it loses its connection to a host
(for example, when a user holding the scanner walks out of range). Data
transmission is triggered by reestablishing the connection with hsot (for
example, when a user holding the scanner walks back into range).