Billy Goat AE400H - Manual (Page 6)

Part No 360251 Form No F050107A 6
AE Owner’s Manual
INTENDED USE
INTENDED USE: This machine is designed for aerating established lawns and large grass covered areas. The
machine should not be used for any other purpose than that stated above.
DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn tine reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble
shooting section on page 14).
INSTRUCTION LABELS
The labels shown below were installed on your BILLY GOAT
® Aerator. If any labels are damaged or missing, replace them before operating this
equipment. Part numbers from the Illustrated Parts List are provided for convenience in ordering replacement labels. The correct position for
each label may be determined by referring to the part numbers shown.
LABEL WARNING GUARDS LABEL EXPLOSIVE FUEL LABEL PATENT LABEL WARNING UNIT WEIGHT
P/N 900327
P/N 400268 P/N 360286 P/N 360188
LABEL LIFT HERE LABEL INSTRUCTIONS AE
P/N 360187 P/N 360262
ENGINE LABELS
THROTTLE CONTROLS
BRIGGS HONDA
Briggs and Stratton Honda
Choke
Fuel valve
Throttle
Set lever to choke position when starting a cold engine
Set lever to desired engine speed. Move lever
completely to the left to stop engine