TerraWave GTRM 100 KIT V3.0 - Manual (Page 21)

21
When you have everything set up correctly, use the Email Test screen to send a test email to your
account. This will verify the settings.
Note: You must have a direct connection to the Internet in order for the email alerts to work. If you are
connected to a corporate network or behind a firewall the email alert may not work. A network
administrator will need to configure the GTRM to be part of the network and give it access to the
Internet to ensure the email configuration works properly.
If everything is setup correctly, click “Send Test Message” and in a few seconds you should receive an
email from the GTRM. If it works, you are setup properly and you will now receive alert messages
anytime the GTRM goes into alarm.
Network Configuration