Therasage RX8000 Series - Manual (Page 7)

�
11 12
RELAX and TAKE CONTROL
������������
��
������
�������
����������
����
��������
���������
���������
��
����������
�
�
FRONT
HEAT
BACK
HEAT
UP DOWN
MODE
SMOOTH
SHIATSU
REVITALIZE
On/Off
Press to turn unit on or off
Front Heat (Hand Projector)
Press to adjust Heat
Back Heat
Press to adjust Heat
Vibration
Press to add vibration or
turn vibration off
Manual Mode
Press and hold to direct rollers
towards head
NOTE: There is an automatic auto shut-off developed for your safety if the bed remains
paused for 15-minutes.
HAND CONTROL INSTRUCTIONS:
Make sure that the Main Power Switch located on the head of
the bed is “On”
Massage Programs
1. Press the hand control “On” button
2. Select one of the individual 30-minute Massages: Smooth,
Shiatsu, Revitalize, or QS/Massage.
3. To switch from one selection to another, simply press the
new desired button. The bed will automatically switch to
the new choice wihtout interrupting the massage timer.
4. To pause or resume any program, just press the selected
Massage button.
Vibration
1. Press the hand control “On” button
2. Select any desired massage.
3. Press (Vibration) to add vibration or turn vibration off to
any massage option.
Heat
1. Press the hand control “On” button
2. Press “Front Heat” to achieve desired temperature
(default is “Low” setting)
• This will regulate the temperature of the
hand held projector
NOTE: NEVER APPLY FRONT HEAT SOURCE DIRECTLY TO SKIN
3. Press “Back Heat” to achieve desired temperature
(default is “Medium” setting)
• This will regulate the temperature of the bed
Low (115°F) Medium (135°F) High(145°F)
NOTE: HEAT ONLY FUNCTION CAN BE INITIATED BY PRESSING
ANY HEAT BUTTON ONCE.
QS/Massage
1. Press the hand control “On” button
2. Select one of the individual 30 minute Massages
3. The bed will default to “Full Body” massage
4. Press “QS/Massage” to direct your personalized Massage
Bed to concentrate on any desired general location on your
body: Total, Upper, or Lower Body.
Manual Mode
1. Press the hand control “On” button
2. Press “Up” to move the rollers from feet to head
3. Press “Down” to move rollers from head to foot
4. Use this button to manually move the Massage Bed rollers
to a desired specific location on your body, or
for spot relief.
End of Session
Upon completing your personal massage session, press the hand
control “On/Off” button to turn the bed off. The rollers will
return to the foot of the bed. To shut down the main power,
turn off the power rocker switch near the head of the bed.
Smooth
Full uninterrupted total body
smooth massage.
Press to Pause or Resume.
Shiatsu
Performs 16 graduated incremental
acupressure movements, unblocking 67
Meridian Points along your back.
Press to Pause or Resume.
Revitalize
Total body graduated incremental
massage movements stimulating and
awakening your full body.
Press to Pause or Resume.
QS/Massage
Press for Quick Start
(demo of all the above programs).
Press after choosing a program to choose
a body massage location.
Manual Mode
Press and hold to direct rollers
towards feet