Thermal Transfer Systems M3-VG - Manual (Page 8)

How to contact Alfa Laval
Contact details for all countries
are continually updated on our website.
Please visit www.alfalaval.com to
access the information directly.
ENSR00003USEN 0206 All rights reserved for changes in specifications
Working principle
Channels are formed between the plates and the corner ports
are arranged so that the two media flow through alternate
channels. The heat is transferred through the plate between
the channels, and complete counter-current flow is created
for highest possible efficiency. The corrugation of the
plates provides the passage between the plates, supports
each plate against the adjacent one and enhances
the turbulence, resulting in efficient heat transfer.
Standard materials
Frame plate
Mild steel, painted
Nozzles
Carbon steel
Lined: Stainless steel, Titanium
Plates
Stainless steel AISI 304, AISI 316
Titanium, Alloy 20/18/6
Gaskets
M10B
Nitrile, EPDM, Viton ® G
M10M Nitrile, EPDM, HeatSeal F™
EPDMF-FDA, Viton
® G
Connections
FML Size 4" ANSI 150
FM Size 4" ANSI 150
FG Size 4" ANSI 150
FD Size 4" ANSI 150
FD Size 4" ANSI 300
Technical data
Mechanical design pressure (g)/temperature
FML
150 psig/320°F (non-ASME)
FM 100 psig/320°F
FG 150 psig/356°F
FD 360 psig/356°F
Maximum heat transfer surface
M10B
1126 sq. ft.
M10M 660 sq. ft.
Dimensions
Measurements (mm)
Type H W h
M10-FML 38.62" 18.11" 5.1875"
M10-FM 38.62" 18.11" 5.1875"
M10-FG 38.62" 18.5" 5.1875"
M10-FD 42.70" 18.5" 8.4375"
The number of tightening bolts may vary depending on pressure rating.
Particulars required for quotation
– Flow rates or heat load
– Temperature program
– Physical properties of liquids in question ((if not water)
– Desired working pressure
– Maximum permitted pressure drop
– Available steam pressure
Flow principle of a plate heat exchanger
34" – 92"
8.86" or 9.125"
26.3"
THERMAL TRANSFER SYSTEMS, INC.
[email protected]
PH: 800-527-0131 FAX: 972-242-7568