Thermalright Silver Arrow AM2 - Manual

Retract AM2 X Bracket to its smallest
form and slide it through between the
heatpipes. Extend it back to its original
form and place it on top of the heatsink.
Apply the anti-vibration Pad to each
side of the heatsink. Insert each end
of the fan clips into its designated
holes on the heatsink.
Apply a thin layer of thermal paste across
the surface of the CPU and the heatsink
bottom.
Place the heatsink on top of CPU and
secure in place by tightening on the
spring loaded screws to the AM2
backplate on the other side of the
motherboard.
Place a 14cm fan to the heatsink and pull fan clip to hook into fan mounting holes.
Plug in for power. installation completed.