Thrush GTU User Manual
Page 5
13.
Place new gasket (27) to bracket (15) and bolt bracket to casing (28). Re-install motor (50) to
bracket, guiding coupling over shaft. Retighten coupling.
14.
Reinstall 4-bolts (30B) securing motor to bracket (15).
15.
Reinstall 4-motor support bolts (43), 4-washers (44), and 4-nuts (47).
16.
Open valves that were closed in Step 3. Vent all air and reconnect wiring to motor.
17.
Verify alignment before starting pump.
GTU Motor/Cartridge Parts List
10.
Cartridge Unit - 2104-0900
35.
Impeller Acorn Nut - 9749-2430
14.
Impeller Key -
37.
Impeller - 9606-3150
21.
Seat & O-Ring -
38.
Pump Support Bracket - 2100-0910
22.
Rotary Seal Head -
7301-5000
43.
Bolt Motor to Support Bracket - 9604-020
27.
Casing Gasket -
44.
Washer - 9751-0080
15.
Bracket - 2150-0901
45A.
Coupling Flange -
18.
Brass Seat Holder - 9744-1011
45B.
Coupling Sleeve -
28.
Casing - 9606-1051
45C .
Coupling Flange -
7304-9000
29.
Pipe Plug - 9761-0080
63.
Coupling Set Screws -
30.
Bolt (Casing) - 9604-020
47.
Nut - 9749-2150
30A.
Bolt (Cartridge) - 9747-0700
50.
Motor - 9806-0110 Single / 9806-0271 Three
30B.
Bolt (Bracket to Motor) - 9747-1040
62.
Motor Key, Comes with Motor
}
}
GTU Motor/Cartridge Parts List