Titus HAB Horizontal Air Handler Belt Drive - Manual (Page 2)

HAB Installation Manual
IOM-HAB-00 06-30-04
Unit Cabinet Dimensions
Figure 2 shows dimensional callouts for all sides of an
HAB unit. Table 1 provides the cabinet dimensions for
each HAB model along with the blower-opening outlet.
Coil Specifications
Table 2 provides HAB model specifics for the chilled
and hot water coil outside diameter and shipping weight
based on the number of coils (weight for 4-row chilled
water coil includes weight for entire unit).
Figure 1. Air Handler Model Number
Nomenclature
Figure 2. HAB Dimensional Views
Table 1. Cabinet Dimensions (in inches)
Unit Blower Opening Outlet
Return Duct
Connection Model
A B C D E H F G K L
HAB08 37.00 27.00 18.00 1 9.13 1.00 8.75 10.00 18.00 16.00
HAB12 37.00 36.50 18.00 1 12.09 1.00 12.31 10.88 27.50 16.00
HAB16 42.00 38.00 22.00 1 14.25 1.00 9.50 14.00 29.00 20.00
HAB20 42.00 45.00 22.00 1 16.00 1.00 13.00 14.00 36.00 20.00
HAB30 52.50 54.00 27.00 1 20.38 1.00 13.25 16.75 45.00 25.00
HAB40 52.50 57.00 34.00 1 21.88 8.50 13.25 16.75 48.00 32.00
HAB60 57.50 67.13 42.00 1 Note 1 7.00 (2) 16.07 (2) 15.88 57.75 40.25
HAB80 57.50 72.00 47.0 1 Note 2 11.88 (2) 16.07 (2) 15.88 66.00 45.00
Note 1: Blower opening 7 inches down from top of unit. Looking at discharge 14-3/8 inches left side
and 8-3/8 inches right side.
Note 2: Blower opening 11-7/8 inches down from top of unit. Looking at discharge 14-3/16 inches left,
11-3/8 inches center and 3-15/16 inches right side.
2 of 9