Titus TAF-L Perimeter System IOM - Manual (Page 2)

2 Installation Manual - TAF-L Perimeter System
TAF-L Perimeter System IOM
Redefine your comfort zone. ™ | www.titus-hvac.com
The TAF-L underfloor perimeter system consists of a series of plenum
boxes under linear runs of CT-TAF-L diffuser along the perimeter of a
building. The TAF-L-V plenum provides cooling, the TAF-L-W provides
heating, and the TAF-L-R provides a return.
The TAF-L-V cooling unit has a variable linear bar diffuser with a series of
apertures through which the air exits. The TAF-L-W heating plenum has
a hot water fin tube heater assembly in the plenum.
The CT-TAF-L core itself has a specific wing configuration designed to
deflect the air and provide throw reduction. Figure 1 below shows all the
major components of the system and their typical installation.
CT-TAF-L Diffuser Core
TAF-L-W Heating Plenum
Blankoff Plates As Needed
To Fill Space Between Plenums
CT-TAF-L Diffuser Frame
TAF-L-V Cooling Unit
with Actuated Aperture Plates
TAF-L-R Return Plenum
20" X 8" Opening For Butt
Connected Rigid Duct
Rigid Duct From Return Plenum
To Fan Box (Supplied By Others)
Pedestal
Perimeter Diffuser Assembly
Carpet
Floor Tile
Baseboard
Wall
Figure 1 - Typical Finished Installation
TAF-L Underfloor Perimeter System