Trim-Tex Mud Set 350 Bull - Manual

Mud Set 350 Bull TM
Corner Bead
METHOD 2
Trowel or box on a layer of mud/compound onto drywall corner. Place
your corner bead onto the mudded corner. You can then use your mud
knife or rolling tool to press on the bead. Wipe off excess mud and
finish mudding. The first coat of mud can be applied immediately.
METHOD 2
INSTALLATION
3700 W. Pratt Ave. Lincolnwood, IL 60712-2508 Phone: (847) 679-3000 Fax: (847) 679-3017
Patented Mud Locks
Holes allow
bead to quickly
self level
• SUPERIOR CORNER BEAD AT A LOWER COST,
FEATURING PATENTED MUD LOCK TECHNOLOGY
WITH
MORE BONDING SURFACE. 350%
• WILL NOT OR AND ABSORBS DENT BLISTER
EXTREME IMPACT
• ENGINEERED HOLE PATTERN ALLOWS EXCESS MUD
TO FLOW THROUGH & QUICKLY SELF LEVEL THE
BEAD, SAVING TIME & MATERIALS
• RUST PROOF RIGID VINYL BEAD, DOES NOT
PROMOTE MOLD GROWTH
• MUD LOCK TECHNOLOGY ASSURES NO CRACKS OR
CALL BACKS
• COMPATIBLE WITH MOST HOPPERS AND ROLLER
TOOLS
METHOD 1
Run your bead through a hopper to coat the under side of the bead with
mud/compound. Place your bead on the corner and press down with
mud knife or rolling tool. Wipe off excess mud and finish mudding. The
first coat of mud can be applied immediately.
METHOD 1
LENGTH
10'
STOCK # PCS/ BOX
M 35010 S 40
8' M 35008 S 40
INC.
www. .com T -T RIM EX
To boost the performance and strength of any drywall compound, use
Trim-Tex's high performance MUD-MAX drywall compound additive.
TIP
M 35010 Corner Bead perfectly matches all 350 Bull S
Archways, Accessories & Tools
Mud Set Beads are designed to be installed with mud/compound.
DO NOT install with spray adhesives, staples, nails or screws.
Use roller tool or
mud knife to press
into place
Place bead onto drywall
corner once mud is
troweled or boxed on
35020
# 920 # 920 # 921 # 921
# 923 # 923
# 926 # 926
# 966 # 966
# 968 # 968
# 922 # 922
350 Bull:
Minimal Drywall Setback