Truxedo, inc, Set cover assembly on front bulkhead, Align cover with pickup bed – TruXedo TruXport User Manual
Page 2: Install weather seal on cab end corner plugs
___ 2 ___
Set cover assembly on front bulkhead:
3
Place remaining clamps loosely over side
rails & pickup bed rails:
5
Align cover with pickup bed:
6
truxport
side
rail
place
three
clamps
on
each
side
rail
to
keep
rails
in
place
parallel
to
bulkhead
Front
bulkhead
Place side rails on pickup bed rails.
Assemble clamps. Place rear clamps
loosely over side rails & pickup bed rails.
Insert side rail corner plugs into header:
NOTE:
Additional weather seal may be
required for pickups with bed caps,
tailgate protectors, or liners. Add
weather seal if needed to seal
appropriately.
4
pickup
bed
rail
Install weather seal on cab end corner
plugs:
2
weather
seal
corner
plug
inser
t
inser
t
rear
clamp
P/N 1116032 Rev Y
TruXedo, Inc.
P.O. Box 1078, 2209 Kellen Gross Dr., Yankton, South Dakota 57078
Call Toll Free: 1-877-TRUXEDO (1-877-878-9336) Fax: (605) 664-9304
Visit Us Online: http://www.truxedo.com
center
on
bed
position
on
bulkhead
1
clamp
assembly