TruXedo Deuce - Manual (Page 4)

___ 4 ___
LEVEL
STEP 3-A Position and install driver side rail assembly with
clamps, see note 1 and 2 for installation hints.
SEAL
COMPRESSED
ADJUSTABLE
CLAMP
FOR BEST CLAMPING MOUNT
CLAMP HIGH AS POSSIBLE
Driver’s Side
STEP 3-B Repeat step 3-a to position and install passenger side rail assembly with
clamps, see notes 1 and 2 in step 3-A for installation hints.
Tighten clamps securely on side rails before driving vehicle. WARNiNG !
While clamping press down to compress side seal
End To End, Must Be Flush
Note 2
Note 2
!
3/8”
Driver’s Side Shown
Tailgate
if rear seal is not slightly
compressed then
reposition assemblies
rearward slightly.
Note 1
Note 1
Tighten clamps securely on side rails before driving vehicle. WARNiNG !
STEP 4
Works best with tailgate
down as shown.
Attach cover assembly to the driver and passenger side rails as shown.
Correct if levers point to
the rear or toward the
tailgate.
To Release