TruXedo TonneauTraX User Manual
Page 4
CARGO ANCHOR INSTALLATION
STEP 11:
To install the cargo anchor, first take one of the cargo anchors and push it into the cargo rail at one of the attachment positions
with three holes near each other. Then slide the cargo anchor to the left or right to lock it in place.
STEP 12:
To adjust the position of the cargo anchor, pull on the cargo anchor T-Release and slide anchor down along the rail to the
desired hole position.
cargo anchor loop
cargo anchor T-Release
SECURING THE COVER WHEN ROLLED TO THE FRONT
STEP 9: To release cover, trigger pull rear
release toggle. Start rolling cover toward
cab making sure both sides of cover roll
evenly. For best results, leave unrolled
portion of cover attached to the hook
fastener strip while opening.
Cover shown rolled
open and secured with
safety straps.
safety
straps
STEP 10: Secure cover open by hooking
safety straps to front loops.