Unisteer 8011570 Ford Fairlane Rack 1963-1965 - Manual (Page 6)

Page 6 656250
10. From under the car locate the 4 bolts that retain the mounting blocks to the main mounting bracket.
NOTE: DO NOT REMOVE THE BOLTS THAT HOLD THE MOUNTING BLOCKS TOGETHER. You
need to remove the 2 on the driver side and the upper on the passenger side; these are button head
3/8” bolts. When you have done that swing the driver side of the rack down. In the down position,
install the supplied 7/16” bolt from the inside of the frame out. Then remove the lower one installed
earlier on the driver side and turn it around and install it from the inside of the frame out.
11. After that is done reinstall the mounting block bolts applying locktite to the threads and torque to 30 ft
lbs.