Unisteer 8050720 Camaro Steering Shaft User Manual
Unisteer For the car
pg. 1
655430
Camaro Steering Shaft Instructions (Small Block Chevy motor)
# 8050490, 8050510, 8050720
Full refund will NOT be granted to any kits that are damaged,
scratched, or altered in any fashion.
Kit Contents:
#
Part Number
Description
Quantity
1
542950
DD Shaft w/ Spline
1
2
8050640
17 DD x ¾ DD U-Joint
1
3a 8050350
1”-48 x 9/16-30 U-Joint (Only in Kit # 8050490)
1
3b 8050340
1”-DD x 9/16-30 U-Joint Only in Kit # 8050510)
1
3c 8050890
¾”-36 x 9/16-30 U-Joint (Only in Kit # 8050720)
1
These Steering shafts require some assembly and some trimming. Please follow these
instructions carefully and read completely before starting.
1. Thread the support bearing with the jam nut into the steering shaft support bracket until the shank
is flush to the frame side of the support bracket (note the bracket is labeled frame side).
2. With the support bearing flush the curved side of the bracket should be pointing slightly toward
the ground.
1
2
3