Unisteer 8011060-01 Chevy Impala Rack & Pinion Kit 1958-64 - Manual (Page 4)

pg. 4
655910
3. Remove the 3 bolts on the driver side frame rail that retains the steering box to the frame. Remove
the steering box and steering linkage assembly from the vehicle.
4. Once you have the stock linkage removed, it will be necessary to remove the stock coupler joint at
the steering column. To remove it you must first remove the retainer ring from the coupler, next
remove the cover by sliding it down out of the way.
Retainer
Ring