UVP iBox Explorer Imaging Microscope - Manual (Page 9)

iBox Explorer
2
9
Installing the Hardware
Darkroom Setup

When unpacking and setting up the darkroom, two people are required to move the darkroom.

Place the darkroom on a flat surface which can provide adequate support for up to 120 pounds.
NOTE: This system is designed for indoor use only.
Darkroom Filter Setup

Place the filters into the filter tray in the appropriate positions as noted below. Once all filters are in
place, position the magnetic filter holder over the filter tray to hold the filters in place.

Open the darkroom door
and slide the filter tray
well door open. Place the
filter tray into position with
the lip facing up (note that
the filter must be set to
position #2 in
VisionWorksLS in order
for the filter tray to be
inserted or removed).
Filter Position #1 – 515 Long Pass
Filter Position #2 – 535/45 GFP
Filter Position #4 – Neutral Density
Filter Position #3 – 605/50 RFP
Filter Tray
Filter Holder
Lip facing up Filter tray well door