Maintenance, repair and technical assistance, Changing the replacement tubes, Cleaning the transilluminator – UVP Visi-Blue Transilluminators User Manual

Page 3: Replacement parts and accessories

Advertising
background image

Maintenance, Repair and Technical Assistance

UVP offers technical support for all of its products. If you have any questions about the product’s use, operation
or repair, please call or fax UVP Customer Service in the US at (800) 452-6788 or (909) 946-3197, Fax: (909) 946-
3597; In Europe/UK: +44(0)1223-420022; Fax: +44(0)1223-420561.

Note: A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Service
before returning any product.

ALWAYS DISCONNECT THE TRANSILLUMINATOR FROM THE ELECTRICAL POWER PRIOR TO CLEANING OR
REPLACINGS TUBES.

Changing the Replacement Tubes

1. Disconnect the transilluminator from the electrical supply.
2. Remove amber protective cover by sliding hinges out of the filter cover.
3. A Phillips head screwdriver is required to remove the filter cover.
4. Carefully twist the UV tubes from their sockets.
5. Fit with the proper replacement tubes (refer to Section 5.3 for ordering information).
6. Replace filter cover and amber protective cover.

Cleaning the Transilluminator

The surfaces and filter areas of the transilluminator should be cleaned with water, soap, and a sponge or cloth
towel. Never use abrasive cleaners, solvent-based cleaners or scouring pads (can damage the UV filter surface or
cover). Always disconnect the transilluminator from the electrical power prior to cleaning.

Replacement Parts and Accessories

For replacement parts or components not shown here, call UVP Customer Service or place of purchase. Please
have the transilluminator model number available when you call.

Replacement Parts

Accessories

Part Number Description

Part Number

Description

34-0060-01

Tube, 25 watt, 365nm BL for VB-40

85-0002-01

Gel-Cutter

34-0031-01

Tube, 8 watt, 365nm BL for VB-26

85-0006-01

Gel-Scooper

38-0214-01

Filter Assembly for VB-26

85-0005-01

Gel-Tray, UV Transmitting, Large

38-0215-01

Filter Assembly for VB-40

85-0003-01

Gel-Ruler, UV Fluorescing

19-0170-01

Amber Protective Cover for VB-26

98-0002-01

Spectacles, UV Blocking

19-0171-01

Amber Protective Cover for VB-40

98-0002-02

Goggles, UV Blocking

22-0084-01

Hinges for Amber Protective Cover (2 required)

98-0002-04

Faceshield, UV Blocking

38-0240-01

Spectables, Orange Protective

NOTE: When ordering replacement tubes, refer to “Number of Tubes” required which can be found under
Specifications on page 2.

3

Advertising
This manual is related to the following products: