Buffalo Technology 2.4GHz Indoor Omni Antenna WLE-NDR - Manual (Page 4)

4
Installing a 2.4GHz Indoor Omni Antenna
with an AirStation Client Card
Ẅ
Locate the rubber plug hiding the
external M
C antenna connector
on the top of the AirStation 54Mbps
Notebook Adapter.
ẅ
Pull the rubber plug to reveal the
external antenna connector.
Ẇ
Connect the antenna to the
Notebook Adapter by plugging the male
M
C connector on the antenna cable
to the female M
C connector on the
Notebook Adapter.Push firmly into place
to ensure a good connection.
NOTE: Client Cards with external antenna support vary but installation
remains the same.