UVP Life Science - Manual (Page 122)

LS Software User Guide
108
Place Bands Exactly
• Click 1D Analysis Action Tab > Find Lanes and Bands menu.
• Select the band to resize. Control handles will appear at the four corners of the band as red
boxes.
• Right click onto the band of interest. Analysis > 1D Analysis > Bands and then select Band
Properties. The Band Information window appears.
• In the section of the window labeled Geometry, the numerical values of the Top, Peak and
Bottom of the band may be changed.
• Enter the new numbers, click on OK. Now the location and dimensions of the band reflect
precisely the values entered.
Next Steps: Perform a Molecular Weight Calibration, Concentration Calibration, or Dendrogram Analysis