Specifications – Bogen V250 EN User Manual
Page 14
Specifications
12
Power Output (RMS):
V35: 35W (45W Typical, @ 1 kHz/0.1%/4
Ω)
V60: 60W (85W Typical, @ 1 kHz/0.1%/4
Ω)
V100: 100W (140W Typical, @ 1 kHz/0.1%/4
Ω)
V150: 150W (200W Typical, @ 1 kHz/0.1%/4
Ω)
V250: 250W (340W Typical, @ 1 kHz/0.1%/4
Ω)
Frequency Response
Transformer:
45-20 kHz; 0/-2 dB @ FRP
Direct:
20-20 kHz; 0/-1 dB @ FRP
Distortion
Transformer:
0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
Direct:
0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
Direct:
0.05% THD+N, FRP @ 1 kHz
Signal-to-Noise
Fundamental:
-94 dB*
With Aux Module:
-70 dB*
With Mic Module:
-60 dB*
With Tel Module:
-70 dB*
Tone Controls
Bass Frequency:
1
00 Hz (+/- 10 dB minimum)
Treble Frequency:
1
0 kHz (+/- 10 dB minimum)
Low Cut Frequency:
1
25 Hz @ -6 dB/octave
Sensitivity
0.4V (at backplane connector)
Output Regulation:
2 dB or better no load to full load
Output Impedance
Transformer-Coupled:
70V, 25V, 8 ohms; balanced or unbalanced
Direct Coupled:
4 ohms
Inserts
Insert "OUT" Level:
1
VRMS (@FRP)
Insert "OUT" Impedance:
50 ohms maximum
Insert "IN" Sensitivity:
1
VRMS
Insert "IN" Impedance:
1
0k ohms minimum
Buffered Output
Output Level:
4VRMS (Max Amp Gain @ rated input sensitivity
Output Impedance:
50 ohms maximum
AC Power Receptacle:
500 watts maximum power, unswitched
AC Line Draw:
V35: 0.6A;V60: 1.3A;V100: 2A;V150: 3.5A;V250: 5.5A
Dimensions:
1
6
1
/
2
" W x 3
1
/
2
" H x 12" D (all models)
Product Weight:
V35:
24 lb.
V60:
28 lb.
V100:
32 lb.
V150:
35 lb.
V250:
40 lb.
* Referenced to FRP output level, 20-20 kHz bandwidth limited.
All specifications subject to change without notice.