Boston Acoustics TSU501 - Manual (Page 30)

SETUP AND USE GUIDE 28
to relabel.
3 Press and hold the Mode button for 3 seconds.
The Mode screen appears.
4 Tap Label, Tap Next, select the button you wish to label, and continue
with step number 3 above (p. 27). Use the Page Up/Down keys to access
other buttons within the Device.
Recording Macros
A macro allows you to send a sequence of commands using one single button.
You can for instance, switch on your TV, turn to a movie channel and prepare
your VCR for recording by rewinding the videotape.
To record macros, the Avidea Remote has to be in Macro mode.
1 Go the Device Page.
2 Select the Device, e.g. TV, with the buttons you want to program
as a macro.
Note Basically, you can assign any button as a macro button. However, it is
recommended to assign only the reserved macro buttons on the last page of
every Device. Use the Page Up and Page Down buttons to go to the last page
of the Device.
3 Press and hold the Mode button for 3 seconds.
The Mode screen appears.
4 Tap Macro on the Mode screen.
A message screen appears. The Avidea Remote
is now in Macro Mode.
USING THE AVIDEA REMOTE