Bissell 3561 - Manual (Page 11)

11
1
2
1
2
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
1
2
3
Troubleshooting
WARNING:
To reduce the risk of
injury from moving parts
and/ or electrical shock,
turn Power Switch OFF
and disconnect polarized
plug from electrical out-
let before performing
troubleshooting checks.
Replacement Parts
1.
4.
4.
3.
2.
Vacuum cleaner won't run.
Possible Causes Remedies
Vacuum Cleaner is not plugged in Check electrical plug
Check electrical cord connection on back
of vacuum
Household fuse/circuit breaker tripped Check/replace fuse - Reset breaker
Vacuum cleaner won't pick up dirt.
Possible Causes Remedies
Dust Bag is full Replace with new Bag
Rotating Brush Drive Belt Realign Belt; if broken replace
Rotating Brush bristles worn Replace Rotating Brush
Rotating Brush jammed Remove brush and clean debris
from Brush Ends; replace Belt
Air passageway clogged See “Cleaning the Dust Tube” from passageway
Vacuum Tube is clogged Clean tube - see instructions on page 8
Accumulation of dust inside Cloth Bag
Possible Cause Remedies
Dust Bag is clogged or dirty Replace Dust Bag
Dust Bag Retainer not closed Engage snaps
Clog at inlet Shake dust down to bottom of Bag
Item Part No. Part Name
1 32053 Drive Belt (2-Pack)
2 32052 Filtrete HEPA Bags
(3-Pack)
3 32062 Micro Filtration Bags
(3-Pack)
4 32054 Filtrete Filter (2-Pack)
5 G.E.921 Replacement Light Bulb
If suggested solutions for this or any function of the
Cleaner do not correct the problem, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or visit our website @ www.bissell.com
ug310-6004_3561_404.indd 11 ug310-6004_3561_404.indd 11 4/29/04 8:29:14 AM 4/29/04 8:29:14 AM