Waldmann PULSE PIR version IV - with MFT, Typ I - Manual (Page 20)

20
Operating Manual Light Control “PULSE PIR - Vers. IV with MFT” ENG
Explanation of the functions (part 3)
Function 1.7
Demo mode
Function to demonstrate and to
test the light functions.
The default setting of this function
is “OFF”, i.e., the demo mode is
inactive.
All control times are working in the
seconds range if the demo mode
is switched on.
Note: This mode is left automati-
cally 10 minutes after the last key
was pressed.
The function can be changed on
lights with sensors XXX /R
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II
Note: The functions written in
blue are not available.