Walker Edison Furniture BWTOD Wood Twin/Full Bunk Bed User Manual
Page 25
Advertising
Turn slats (3,4) over so the curve is on top. Attach slat (3) to legs (12,14), and slat (4) to legs (13,15) using
small joint connectors (L). Secure slats (5) to the leg assemblies using extra-large screws (E).
Attach the leg (12,14) assembly to crossbeams (8,9) using large joint connectors (I) with barrel nuts (B). Note
the small diagram above for proper large joint connector/barrel nut assembly.
Advertising