Waring Pro MBB1000 - Manual (Page 9)

9
OPERATING INSTRUCTIONS
1. When placing the container on the blender base, make sure
that the unit is unplugged. Do not put the container on or take
it off while the unit is running. Doing so may damage your
blender.
2. Plug it into a convenient outlet. The LED lights will illuminate
over the control panel when the unit has been properly
plugged in.
3. Put ingredients into the container and place the cover on top.
Do not fill over MAx FILL line.
NOTE: Do not use a container other than the one provided.
4. Depending on what you are blending, choose speed 1–10 or
PULSE to blend ingredients to desired consistency.
FOR CONTINUOUS BLENDING
Turn the variable speed control knob clockwise to set the speed
from 1 to 10 based on the ingredients you wish to blend.
Press the START/STOP button to begin blending. The LED lights
above the START/STOP button will begin flashing. When you
have achieved the desired results, press the START/STOP button
to stop.
FOR PULSE BLENDING
Press and hold the PULSE button until ingredients have achieved
the desired results. The LED lights above the PULSE button will
flash when the PULSE button is pressed.
Allow blades to come to a complete stop before removing the
container from the blender base.
WARNING: Never place the container on the blender base or
remove it from the blender base while the motor is running.